Skip to content

Architecture revision consequence studio

Know what a revision breaks before it’s issued.

PLANRIFT checks every door swing against the furniture in whole millimetres and lists the drawings that must be reissued. Drag door D-101 along the wall to try it.

Open the studio

Revision A

Move the door 1,300 mm east and the leaf hits the console.

At 3,000 mm the swing reaches console F-07 after 15.7°. The leaf would push 188.7 mm into it, over 0.041 m² of its top.

Same numbers, drawn

The model is the drawing.

Plan and 3D are built from one scene, so they cannot disagree. The colours along the wall are the hinge map: the result at every millimetre the door could sit.

Revision B

It fits at 2,400 mm. 3 sheets still change.

The swing clears F-07 by 391.5 mm. Every drawing that shows the door is flagged for a person to reissue; PLANRIFT never edits them.

A-101 miniature
A-101Rev C

Level 5 Floor Plan — Guest Rooms 512–513

Review required

Door tag, swing and position on the floor plan

A-401Rev B

Interior Elevations — Room 512

Review required

South wall elevation: opening position and size

D-01Rev D

Door Schedule — Level 5

Review required

Schedule row D-101: size, type, handing, location

A-402 shows nothing that moved: not flagged.

1,700 mmPass
Opens
90.0°
F-07
1,083.7 mm clear
Sheets
0

D-101 at 1,700 mm: Pass. Opens the full 90° without touching furniture.

Where can the door go?

D-101 can sit anywhere on the 6,000 mm south wall of R-512. Every millimetre was solved; move along the strip and the plan above is recomputed at each position.

D-101 · hinge from west cornerConflict

2,803mm

Strikes console F-07 after 15.7° of opening.

Door opens
15.7° of 90°
Intrusion into F-07
1.2 mm
Drawings to review
A-101 · A-401 · D-01
R-512 plan with D-101 hinged at 2,803 mmStrikes console F-07 after 15.7° of opening.R-512 · GUEST ROOM 512F-01King bedF-02F-03F-04F-05F-06F-07F-08F-09strike 15.7°D-101

Hover or drag the strip. ← → 10 mm · Shift 100 mm · Alt 1 mm · Page Up Page Down next boundary · Home End

Three positions. One breaks.

The approved plan and two proposals, measured by the same engine with the same settings. Revision A strikes console F-07 after 15.7°. Revision B clears it by 391.5 mm and still puts 3 drawings under review.

D-101 × F-07 · R-512Contact ±1 mm · near clearance < 100 mm

Approved

REV-0 baseline
Plan detail
Approved: D-101 at 1,700 mmOpens the full 90° without touching furniture.
Result
Pass

Opens the full 90° without touching furniture.

Hinge

1,700 mmbaseline

Door opens

90.0°of 90°

Console F-07

1,083.7 mmclear

Drawings to review

None

Decision

Approved baselineREV-0 · in force

Revision A

Proposal
Plan detail
Revision A: D-101 at 3,000 mmStrikes console F-07 after 15.7° of opening.F-07
Result
Conflict

Strikes console F-07 after 15.7° of opening.

Hinge

3,000 mm+1,300 mm

Door opens

15.7°of 90°

Console F-07

188.7 mmintrusion

Drawings to review

3 to reviewA-101 · A-401 · D-01

Decision

Rejected· Sample reviewer“Leaf strikes console F-07 after 15.7°.”RCPT-99B110A8-RA

Revision B

Alternative
Plan detail
Revision B: D-101 at 2,400 mmOpens the full 90° without touching furniture.
Result
Pass

Opens the full 90° without touching furniture.

Hinge

2,400 mm+700 mm

Door opens

90.0°of 90°

Console F-07

391.5 mmclear

Drawings to review

3 to reviewA-101 · A-401 · D-01

Decision

Accepted· Sample reviewer“Full swing clear. Reissue the flagged sheets.”RCPT-BA406D1D-AB

A clear swing still changes the drawing set.

At 2,400 mm, D-101 clears F-07 by 391.5 mm. The door still moved 700 mm, so every sheet linked to it is flagged for a person to revise and re-issue. PLANRIFT marks them; it never edits them.

Floor plan as issued

A-101

REV C

Level 5 Floor Plan — Guest Rooms 512–513

Issued
2026-10-21
Status
Issued for coordination

D-101 hinge position 1,700 mm → 2,400 mm (+700 mm)Door tag, swing and position on the floor plan

Review required

F-07D-1012,400B

A-401

REV B

Interior Elevations — Room 512

Issued
2026-10-14
Status
Issued for coordination

D-101 hinge position 1,700 mm → 2,400 mm (+700 mm)South wall elevation: opening position and size

Review required

MARKSIZEOPERATIONWALLHINGED-101850 × 2100hinged-singleR-512 · south1,7002,400BD-102850 × 2100hinged-singleR-513 · south4,300

D-01

REV D

Door Schedule — Level 5

Issued
2026-10-28
Status
Issued for coordination

D-101 hinge position 1,700 mm → 2,400 mm (+700 mm)Schedule row D-101: size, type, handing, location

Review required

No record for R-513 or A-402 Interior Elevations — Room 513. Only sheets linked to the element that changed are flagged.

PLANRIFT · revision receipt

RCPT-BA406D1D-AB

Aster House Hotel — Guest Room Revision

Scenario B · Door at 2,400 mm

Change
D-101 hinge position 1,700 mm → 2,400 mm (+700 mm)
Result
D-101 × F-07Pass391.5 mm
D-101 opens 90.0° of 90°
Source → result
REV-0 7b39e7d7ee2e
→ REV-1 ba406d1d1bca
Documents acknowledged
A-101 rev Cacknowledged
A-401 rev Backnowledged
D-01 rev Dacknowledged
Decision
Accepted · Sample reviewer
2026-11-03 16:20 UTC
“Full swing clear. Reissue the flagged sheets.”

planrift-geometry/1.0.0

A review record, not a construction certificate or a compliance statement.

Kiro built it. Hooks kept it honest.

The work ran through 5 specs (38 of 49 tasks done), 9 steering files and 7 custom agents. 6 hooks decide what the agent may do on its own. This page reads them from .kiro/ when it is built.

.kiro/hooks · in the order they fire during a session can stop the action
  1. SessionStartSession starts

    Resume summary from the repository

    session-resume

    node scripts/kiro/session-status.mjs
  2. PreTaskExecSpec task starts

    Types must pass first

    task-start-gate

    node scripts/kiro/run-check.mjs typecheck --block
  3. PreToolUseAgent writes a file

    Credentials are blocked

    secret-guard

    node scripts/kiro/secret-guard.mjs
  4. PostFileSaveAgent edits src/domain

    Geometry tests run

    geometry-regression

    node scripts/kiro/run-check.mjs test:domain
  5. PreToolUseShell: deploy or push

    Asks you first

    public-action-guard

    node scripts/kiro/public-action-guard.mjs
  6. PostTaskExecSpec task ends

    Typecheck · lint · tests

    task-completion-gate

    node scripts/kiro/run-check.mjs typecheck lint test --format-changed

Specs38/49 tasks

  • core-geometry-engine8/8
  • quality-assurance3/7
  • release-submission6/11
  • revision-workflow6/8
  • studio-experience15/15

Custom agents7

  • architecture-reviewerIndependent read-only reviewer for PLANRIFT.
  • design-directorOwns PLANRIFT's product design quality across the landing page and the studio — art direction (DESIGN.md), layout, typography, motion, and the visual QA loop (capture screenshots, critique, fix).
  • frontend-experience-engineerOwns PLANRIFT's React UI — landing page, /demo workspace layout, 2D plan editor (SVG), panels, comparison, decision flow, accessibility and responsive behaviour.
  • geometry-engineerOwns PLANRIFT's pure geometry and revision engine in src/domain (door-sweep solver, tolerances, statuses, diff, impacts) and its property-based tests.
  • qa-engineerOwns PLANRIFT end-to-end, accessibility, responsive and visual testing with Playwright, plus evidence capture in docs/evidence.
  • release-producerOwns PLANRIFT build verification, deployment preparation, README, screenshots, demo video script and shot list, YouTube and Devpost copy, and the submission checklist.
  • visualization-3d-engineerOwns PLANRIFT's WebGL "white model" (src/components/scene) used by the landing hero/story stage and the studio's Model view — React Three Fiber scene, lighting, soft shadows and ambient occlusion, drag interaction, scroll-driven camera, and the model-to-drawing morph.

Steering9

  • accessibilityfile match
  • design-systemfile match
  • geometryfile match
  • productalways
  • releasemanual
  • securityalways
  • structurealways
  • techalways
  • testingfile match

Exact about one problem. Silent about the rest.

The engine solves single-leaf door swings against rectangular furniture in whole millimetres. Anything outside that model is reported as Unsupported, never guessed, and nothing here is a compliance or approval tool.

Modelledcomputed by the engine, tested

  1. 01

    Rectangular rooms

    Axis-aligned rooms with wall thickness per side, in whole millimetres.

  2. 02

    Single-leaf hinged doors

    A 90° inward swing, tested at every whole-millimetre hinge position.

  3. 03

    Rectangular furniture

    Unrotated footprints, checked against the full swept sector.

  4. 04

    Scenarios, comparison, receipts

    Branch from the approved revision, compare side by side, record the decision.

  5. 05

    Exports

    Project JSON, impact ledger CSV, printable HTML receipt, plan SVG.

Not claimedout of scope on purpose

  1. 06

    Code, accessibility or egress compliance

    Clearances describe the modelled geometry only.

  2. 07

    Approval to build

    A receipt records a review. It is not a certificate.

  3. 08

    DWG, DXF, IFC or Revit

    No CAD or BIM import or export.

  4. 09

    Automatic drawing edits

    Flagged sheets are revised and re-issued by the design team.

  5. 10

    Rotated furniture, sliding doors, 3D clash

    Reported as Unsupported, never guessed.

    furniture.unsupported-rotationdoor.unsupported-operation

Move a door. Know what it breaks.

The studio opens on this project: two guest rooms, two doors and four issued sheets. Try a position, compare it with the approved plan and record the decision. It all runs in your browser; nothing is uploaded.

A-101 after Revision BD-101 at 2,400 mm. Opens the full 90° without touching furniture.R-512 · GUEST ROOM 512F-01King bedF-02F-03F-04F-05F-06F-07F-08F-09D-101R-513 · GUEST ROOM 513F-11King bedF-12F-13F-14F-15F-16F-17F-18F-19D-102HINGE MAP0 mm–2,698 mm: Passclear2,699 mm–2,800 mm: Near clearance (F-07)2,801 mm–2,802 mm: Contact — review (F-07)2,803 mm–4,098 mm: Conflict (F-07)conflict F-074,099 mm–4,101 mm: Contact — review (F-07)4,102 mm–4,199 mm: Near clearance (F-07)4,200 mm–5,150 mm: Passclear5,151 mm–6,000 mm: Invalid
A-101Level 5 Floor Plan — Guest Rooms 512–513D-101 at 2,400 mm · drawn from the engine, not an image